Cartridge Filter Working Principle
Unfiltered liquid enters CHUNKE cartridge filter housing and is distributed evenly around the water filter cartridges from outside to inside.
Solids are collected on the cartridges outside for easy removal.
The filtered liquid then exits through the outlet pipe of cartridge filter housing.
Bag Filter vs Cartridge Filter
Both are sediments filters, but most CHUNKE liquid cartridge filters have a much greater filter surface than bag filters as inner water filter cartridges have a pleated conformation.
CHUNKE filter bags can be reused for low operating cost, while CHUNKE cartridge filter inserts are normally disposable that they have to be replaced when the cartridge filter housing is clogged.
CHUNKE bag filters are mostly surface-type filters and are frequently used for dust removal with filtration media, such as activated carbon, needle felt, and nylon. CHUNKE cartridge filters, including multi cartridge filter and single cartridge filter housings can be surface or depth-type filters.
An industrial cartridge filter housing is preferred as sub-micron filtration where there are very low micron levels of contamination and fine particles need to be removed. In many cases, CHUNKE cartridge filter housings can be used as a final purification step.
Applications:
- Bulk chemicals
- Petrochemicals
- Water purification
- Hydraulic fluids
- Cosmetics/pharmaceuticals
- Reagent grade chemicals
- Paints, varnishes
- Semiconductors
- Sugars
- Electric utilities
- Paints/varnishes
- Often used as final filtration
- After other filters
Features and Benefits
- Integral vent, clean and dirty drain sockets to aid efficient filter changeout
- Universal cup enables choice of plug in or DOE cartridge styles in the same housing
- Bolted closure options available
- Every housing is etched with a unique serial number for full traceability
- Available in 316L Stainless Steel
- Full housing customisation service available
- Internally and externally electropolished as standard
| Model | Diameter | Thickness | Flow rate (m3/h) | In/Outlet diameter | Number
of core | |
| CK4-9core×20" | Φ273 | 1.5mm | 4,5 | 2" | 9-10Core | | CK4-9core×30" | Φ273 | 1.5mm | 6,75 | 2" | 9-10Core | | CK4-9core×40" | Φ273 | 1.5mm | 9 | 2" | 9-10Core | | CK4-10core×20" | Φ300 | 1.5mm | 5 | 2" | 10-12Core | | CK4-10core×30" | Φ300 | 1.5mm | 7,5 | 2" | 10-12Core | | CK4-10core×40" | Φ300 | 1.5mm | 10 | 2" | 10-12Core | | CK4-12core×30" | Φ325 | 1.5mm | 9 | 2" | 12-15Core | | CK4-12core×40" | Φ325 | 1.5mm | 12 | 2" | 12-15Core | | CK4-15core×30" | Φ350 | 1.5mm | 11,25 | 2" | 15-17Core | | CK4-15core×40" | Φ350 | 1.5mm | 15 | 2" | 15-17Core | | CK4-20core×30" | Φ400 | 1.5mm | 15 | 2.5" | 20-22Core | | CK4-20core×40" | Φ400 | 1.5mm | 20 | 2.5" | 20-22Core | | CK4-25core×40" | Φ450 | 1.5mm | 25 | 2.5" | 25-27Core | | CK4-35core×40" | Φ500 | 2.0mm | 35 | 3" | 35-38Core | | CK4-45core×40" | Φ600 | 2.0mm | 45 | 3" | 40-45Core | | CK4-55core×40" | Φ700 | 2.0mm | 55 | 4" | 55-60Core | | CK4-85core×40" | Φ800 | 2.0mm | 85 | 6" | 80-85Core | | CK4-100core×40" | Φ900 | 2.0mm | 100 | 6" | 90-100Core |
|
